News
- Installed HTMS system on 3 machines
- OEM chassis continues to monitor inputs and control fan on/off and speed
- Incorporated directional fan control for reversing ability
September 2011-Case-IH STX Tractor
- Installed ETMS on feed mixer body oil cooler units
- Took over fan control of the existing OEM electric fan
- Established 120 degree set point for fan turn on
- Reverse function for debris removal
June 2011 - Roto-Mix Feed Mixer Bodies
- Installed ETMS and an electric reversing fan
- Removed OEM belt driven fan
- Reverse function for debris removal
- Testimonial: "Can run all day without cleaning the radiator, before we had to stop 3 times an hour."
May 2011 Kubota 8200N Tractor
- Installed 9 gallon hydraulic oil cooler/heat exchanger
- Included ETMS for control for electric heat exchanger fan
- Replaced the need for traditional hydraulic oil cooler tank
- Reverse function for debris removal
- Set point for fan turn on to optimizing oil temperature
May 2011 Hensley Super Auger Feed Trailer
- Installed a 9 gallon hydraulic oil cooler/heat exchanger
- Included ETMS for control of electric heat exchanger fan
- Replaced the need for traditional hydraulic oil cooler tank
- Reverse function for debris removal
- Set point for fan turn on to optimize oil temperature
December 2010 Jacobs Turf Mower
- Installed ETMS to take over control of the existing OEM electric fan
- Reversal functions for debris removal
- Test program with Kubota Tractor
October 2010 Kubota Side by Side
- Installed HTMS and hydraulic driven Multi-Wing Fan
- Removed 44 inch variable pitch fan
- Originally variable pitch fan bladed keep breaking off and going through the radiator
- Established set point for fan turn on
- Incorporated variable speed
- Reverse function for debris removal
March 2010 Bandit Beast 3680 Grinder
- Installed ETMS and a 16 inch electric fan that operated in tandem with the OEM belt driven fan
- Additional cooling when used in conjunction with OEM fan
- Reverse function for debris removal
September 2009 Manitou TeleHandler
- Installed HTMS to take over control of the OEM hydraulic fan
- Establish a set point for fan turn on/off
- Incorporate variable speed for fuel savings
- Reverse function for debris removal
June 2009 Cat 980B Front End Loader
ISO Quality Company
ISO 9001:2008 Certified
Kustom Cooling, LLC.
1084 South 5th Street
Coos Bay, Oregon USA 97420